Digital Photography Review

How to Upgrade From Halogen to LED? |


With the ban on halogen now firmly in place, there are still lots of halogen and incandescent lamps out there wasting energy and draining the earths resources. These energy hungry relics from a distant past need to get upgraded to LED. LED is 90% more efficient and lasts for 10 times longer. There are a 3 main options of upgrading from halogen to LED, choosing the right option for you depends on the type of downlights and halogen lamps you’ve currently got.

Option 1 – Retrofit an MR16 LED

If you’re replacing low voltage MR16 50W halogens that have low voltage 12V transformers, the first and obvious option is to replace it with something like an MR16 LED. These retrofit lamps should operate from your existing transformers. Because these particular LEDs operate on AC (Alternating Current) rather than DC (Direct Current) you don’t need to use a special LED driver. But this isn’t always the case as MR16 LEDs aren’t always universally compatible. This often results in you having to replace your transformers. don’t find out that they’re not compatible with your transformers until they start flickering or randomly flashing. This happens more-so when you’re dimming them. Then its back to the drawing board which means replacing the old transformer with a new LED compatible one which would be the Varilight YT transformers.

This involves additional costs, more time and more messing about – which nobody wants. Another consideration is that if you do plan to dim them, you’re going to need to ensure that the LED, the transformer and the dimmer switch are all compatible with each other. The Varilight YT transformers combined with the Varilight V-Pro dimmer switches are compatible, as are the Philips MR16 LEDs. A winning combination! But you’ve now spent more on these items than you would with options 2 and 3.

Option 2 – Convert to GU10 LED

Again if you’re replacing low voltage halogens but want to keep your existing downlights you can convert them into mains voltage GU10 by ordering some basic GU10 lamp holders, a GU10 lamp holder with connector block and GU10 LEDs. This involves disconnecting the transformer and some re-wiring which should be done by a qualified electrician.

Option 3 – Replace Downlights

Install brand new downlights. This option opens up a whole new world of opportunities for you. You could either install new GU10 downlights or integrated LED downlights. In short, integrated downlights have a built in and non replaceable LED, while GU10s are usually cheaper with a replaceable LED. GU10 LED downlights are not as good in terms of light output, life expectancy or guarantee periods. Check out our sale items for our latest special offers on downlights, LED light bulbs and more.

Replacing GU10 Halogens

This is easy and now straightforward to because LED GU10 lamps can be swapped straight over without any wiring or transformers to consider. Here are some options for you to consider if you’re replacing your 50 watt halogen GU10s:

  • Philips Master Value 4.9W GU10 – Ideal for mimicking the dimming effects of a halogen with the Dimtone version
  • Philips CorePro 4.6W GU10 – A cost effective, non dimmable lighting option
  • Aurora Ice 5W GU10 – Available in dimmable and non dimmable, it has a nice wide beam angle of 60 degrees

Need Further Help?

Get in touch with our downlight experts on: 0 or email: [email protected] and we’ll be happy to assist you further.

0 ( 0 votes )

Readers' opinions (0)

Leave a Reply

Your email address will not be published.

Related Posts

New Post

Can a seizure kill you

23/11/2021 14:51 262

Venus in Capricorn Man

23/11/2021 14:41 227

How i knew i had lymphoma

23/11/2021 14:31 233

Can you dry scoop creatine

23/11/2021 14:26 228

What is kesimpta used for

23/11/2021 14:19 326

Load more