- What Causes “SD Card Needs to Be Formatted”?
- How to Fix the SD Card Error with or Without Formatting
- Method 1. Use CHKDSK
- Method 2. Format SD card through Windows Explorer
- Method 3. Format SD card through Windows Disk Management
- Method 4. Format SD card through topdeblogs.com
- How to Recover Lost Data from Formatted SD Card
- A tutorial video for this part:
Factually, SD cards are widely used as internal storage with some unusual errors resulting in damaged files. SD cards are often prone to accidental damage or formatting that leads to the loss of all saved pictures, audio files, and videos. In contrast, this is due to damaged data preventing the appropriate functions of the card.
If your card becomes unreadable and even you are unable to access it after trying many ways, don’t worry. This guide will potentially allow you to consider different techniques and repair your SD card. What are you waiting for? Let’s start.
What Causes “SD Card Needs to Be Formatted”?
The formatting message in memory cards occurs due to the corrupted or interrupted process of writing in the SD card. This is because the computer or camera files required for reading or writing purposes are lost.
Hence, the SD card is inaccessible without a format. Similarly, the occurrence of RAW issues, rude extractions, and logical damages with the pop-up of the error message “disk not formatted” can happen. In such a case, you can’t access a file on an SD card or memory card unexpectedly. It is primarily due to the device is corrupted in the following scenarios.
Related: Fix GoPro SD Card Errors.
It must be devastating to encounter the error, regardless of the cause or scenario. With the “not formatted” error in the memory card, most of the time, your files are still there, but the computer is unable to read them.
How to Fix the SD Card Error with or Without Formatting
How can you resolve this error message – “SD card needs to be formatted”? There are two options available.
Method 1. Use CHKDSK
You might be aware that users often get the CHKDSK unavailable for raw SD Cards error either because of a faulty processor format. Therefore, it is important to make sure that the technique is appropriate. Below are the steps to fix the RAW SD Card without formatting but with the CHKDSK command.
Step 1: Connect your SD card to the computer system and make sure it gets detected automatically.
Step 2: Go to the Start menu, search for Command Prompt, and then click on “Run as administrator”.
Step 3: In the Command Prompt window, enter the “chkdsk” command with the drive letter, “/f” and “/r” respectively. CHKDSD can identify and fix corrupt sectors on the SD card.
Now, wait a moment to allow a window for the disk check and fix all the issues.
Method 2. Format SD card through Windows Explorer
Windows Explorer is the application of the file manager includes the release of the Microsoft Windows OS. It significantly provides a graphical interface for the user to access the file systems.
Looking for an effective way to repair or fix errors in the SD card through formatting using Windows Explorer, follow these simple steps:
Step 1: Connect the SD Card to the computer and open Windows File Explorer. Click on a removable disk and select “Properties”.
Step 2: Go to Tools Tab and Click on Check Button.
Step 3: Check checkboxes, “Automatically fix errors of the file system” and “Scan and attempt recovery of corrupt sectors”.
Step 4: Click Start, wait and close the window until the repairing process completes.
Method 3. Format SD card through Windows Disk Management
Windows Disk management was the replacement to the disk command to enable users to manage the disk drive installation and its associated partition. Thereby, to fix the SD card using the Windows Disk Management, steps are as follows:
Step 1: Connect your device to the system.
Step 2: Change the drive letter and path to present a non-detectable device through the access to Disk Management (This PC/My computer > Manage > Disk Management).
Step 3: Update Device Driver. A step further to Windows Device Manager. (This PC/My Computer > Manage > Device Manager)
Step 4: Expand the controllers of the USB and click on Generic USB Hub to update the driver.
Method 4. Format SD card through topdeblogs.com
Step 1: Go to the Start menu and search for the command prompt to open CMD.
Step 2: Type “diskpart” and click enter.
Step 3: Type “list disk” and press Enter. A list of all the storage devices connected to your computer will be displayed.
Step 4: Type “select disk” and press Enter.
Step 5: Type “clean” and press Enter.
Step 6: Type “create partition primary” and hit Enter.
Step 7: Type “active” and Enter.
Step 8: Type “select partition 1” and Enter.
Step 9: Type “format fs=fat32” and press Enter.
The process will take a few minutes to complete. Do not close the window until the task completes.
How to Recover Lost Data from Formatted SD Card
Formatting your SD card means that all data present on it will be gone. So it can be never too careful when you decide to format it. The loss of data tends to be devastating.
My advice, take it easy. You can get a reliable tool. Recoverit Data Recovery allows you to recover formatted files and repair corrupted videos.
Step 1. Select the SD card where your files are deleted or formatted by accident.
Step 2. Scan the SD Card files sector. Take a moment and wait for the scan to complete.
Step 3. Now, you can preview the SD card data and recover all you want easily.
You can also use this software to fix your corrupted videos from different storage devices, like Dashcam, camcorders, action cameras, Drones, DSLR, SD cards, PC, HDD, and many others. It repairs MP4, MOV, M2TS, M4V, MTS, 3GP, AVI, and FLV videos.
Step 1: Add your corrupted videosLaunch the application on your computer. To repair your corrupted video files, you can add it through clicking the Add button or “Add video and start repairing” area.
Step 2: Repair your videosAs soon as you have added all the corrupted videos, click on the Repair option to start the video repair process.
Step 3: Preview the videosIt will take some time to repair. Later, you can pre-watch the repaired video. Now, you can play these videos and you will not see any error on the screen.
A tutorial video for this part:
A damaged or corrupted SD card restricts the data access stored on the SD card. To avoid this SD card issue in the future, we have some tips for you, including choosing the safe eject mode, making data backups, using the card only on one device, etc.